| Features |
- Easy sensor connect/disconnect
- DC-1000 Hz bandwidth
- Analog & digital outputs
- Simple, user friendly interface
- Barometric reference sensor
|
| |
|
| Products |
200 Series:
printed circuit boards (with optical sub-system) for support of fiber optic
sensor measurements. Designed for integration with vendor system; vendor
supplies DC power, display, operational commands and data key socket. |
| |
|
Model 245: for pressure
and temperature measurements. |
| |
| |
PCB length |
6 in. |
| |
PCB width |
6 in. |
| |
PCB height |
Less than 1.0 in. |
| |
Ambient temperatures |
15 to 40°C |
| |
Outputs |
analog (-0.5 to 3.0 VDC, 10mV/mmHg) and digital
(RS232) |
| |
Output frequency response |
Depends on application (DC to 1 kHz available) |
| |
Power required |
+12 VDC |
|
|
| |
400 Series:
stand-alone instruments for support of fiber optic sensor measurements.
|
| |
|
Model 440: for pressure
and temperature measurements. |
| |
| |
Enclosure size |
10 x 10 x 2.75 in. |
| |
Display |
4 digit LED |
| |
Ambient temperatures |
15 to 35°C |
| |
Outputs |
analog (-0.5 to 3.0 VDC, 10mV/mmHg) and digital
(RS232) |
| |
Output frequency response |
Depends on application (DC to 1 kHz available) |
| |
Power required |
110/220 VAC, 50/60 Hz |
|
|
| |
|
Model 460: for oxygen measurements
(in development). |
| |
| |
Enclosure size |
10 x 10 x 2.75 in. |
| |
Display |
4 digit LED |
| |
Ambient temperatures |
15 to 35°C |
| |
Outputs |
analog (-0.5 to 3.0 VDC, 10mV/mmHg) and digital
(RS232) |
| |
Measurement frequency |
TBD |
| |
Power required |
110/220 VAC, 50/60 Hz |
|
|
